All Products
-
Integrated Circuit Chip
-
Integrated Circuit IC
-
Aluminum Electrolytic Capacitors
-
Flash Memory IC
-
DIP Connector
-
Integrated Circuit Sensor
-
Discrete Semiconductor
-
Optoelectronic Products
-
Power Supply ICs
-
Circuit Protection IC
-
Integrated Circuit Storage
-
Passive IC Components
-
Pol Module
-
Crystal IC
-
Controller IC Chip
Contact Person :
Shen
Phone Number :
+0086 15112667855
Whatsapp :
+8615112667855
High Tolerance Aluminum Electrolytic Capacitors Impedance of 0.04Ω
| Brand: | Lumissil |
|---|---|
| ESR: | 0.04Ω |
| Capacitance: | 470uF |
Efficient Memory Organization 512K X 8 Integrated Circuit with Write Cycle Time 50µs
| Operating Temperature: | -40°C ~ 85°C |
|---|---|
| Voltage - Supply: | 2.7 V ~ 3.6 V |
| Packaging: | Reel |
20g Integrated Circuit with RS485/RS232 Interface for Control Systems
| Communication Protocol: | Modbus/CANbus |
|---|---|
| Sampling Rate: | 1KHz |
| Sensor Type: | Integrated Circuit Sensor |
QFN Package Integrated Circuit Chip with Voltage Supply 2.5V - 5.5V
| Package / Case: | QFN-32 |
|---|---|
| Interface Type: | I2C, SPI, UART |
| Power Dissipation: | 1.2W |
1A DIP with Low Contact Resistance for Reliable Connections 20mΩ Max
| Dielectric Withstanding Voltage: | 500V AC |
|---|---|
| Insulation Resistance: | 1000MΩ Min |
| Number Of Contacts: | 2-64 |
SPI Integrated Circuit Chip for Challenging Temperature Conditions -40°C - 85°C
| Voltage - Supply: | 2.5 V ~ 5.5 V |
|---|---|
| Mounting Type: | Surface Mount |
| Propagation Delay: | 2.5ns |
High-Performance Integrated Circuit 1ms Response Time 0-5V Signal Range
| Data Storage: | 128KB |
|---|---|
| Weight: | 20g |
| Interface: | RS485/RS232 |
Efficient Power Supply ICs Up To 95% Efficiency - B2B Buyers Preferred
| Output Current: | 2A To 10A |
|---|---|
| Integrated Compensation: | Yes |
| Voltage Range: | 1.5V To 24V |
1ms Response Time Integrated Circuit Sensor for Precision Measurements
| Impedance: | 50Ω |
|---|---|
| Sampling Rate: | 1KHz |
| Dimension: | 50mm*50mm*20mm |
1A Current Rating DIP Connector with Phosphor Bronze Contacts
| Termination Method: | Solder |
|---|---|
| Insulator Material: | Polyester |
| Pitch: | 2.54mm |