All Products
-
Integrated Circuit Chip
-
Integrated Circuit IC
-
Aluminum Electrolytic Capacitors
-
Flash Memory IC
-
DIP Connector
-
Integrated Circuit Sensor
-
Discrete Semiconductor
-
Optoelectronic Products
-
Power Supply ICs
-
Circuit Protection IC
-
Integrated Circuit Storage
-
Passive IC Components
-
Pol Module
-
Crystal IC
-
Controller IC Chip
Efficient Power Supply ICs Up To 95% Efficiency - B2B Buyers Preferred
| Output Current: | 2A To 10A |
|---|---|
| Integrated Compensation: | Yes |
| Voltage Range: | 1.5V To 24V |
1ms Response Time Integrated Circuit Sensor for Precision Measurements
| Impedance: | 50Ω |
|---|---|
| Sampling Rate: | 1KHz |
| Dimension: | 50mm*50mm*20mm |
1A Current Rating DIP Connector with Phosphor Bronze Contacts
| Termination Method: | Solder |
|---|---|
| Insulator Material: | Polyester |
| Pitch: | 2.54mm |
I2C Power Supply ICs designed with Integrated Compensation and Control Interface
| Efficiency: | Up To 95% |
|---|---|
| Integrated Compensation: | Yes |
| Control Interface: | PWM, I2C, SPI, Analog |
QFN-32 Package Integrated Circuit Chip featuring Voltage - Supply 2.5V - 5.5V
| Supply Current: | 2.5mA |
|---|---|
| Power Dissipation: | 1.2W |
| Frequency: | 50MHz |
1000MΩ Min Insulation Resistance available for DIP Connector Type
| Insulation Resistance: | 1000MΩ Min |
|---|---|
| Contact Material: | Phosphor Bronze |
| Connector Type: | DIP |
2.5mA Operating Supply Current Integrated Circuit Chip - 24mA Current Output High Low
| Current - Output High, Low: | 24mA, 24mA |
|---|---|
| Operating Supply Current: | 2.5mA |
| Interface Type: | I2C, SPI, UART |
Efficient 4-20mA Output Signal Integrated Circuit with Swift 1ms Response Time
| Response Time: | 1ms |
|---|---|
| Interface: | RS485/RS232 |
| Output Signal: | 4-20mA |
Protection Features Over-Current in Power Supply ICs with Integrated FETs
| Integrated FETs: | Yes |
|---|---|
| Control Interface: | PWM, I2C, SPI, Analog |
| Switching Frequency: | Up To 1MHz |
Efficient DIP with 250V Voltage Rating Low Contact Resistance for Stable Operation
| Number Of Rows: | 1-4 |
|---|---|
| Contact Resistance: | 20mΩ Max |
| Termination Method: | Solder |